Swann Plus App

  1. Swann Plus App For Windows
  2. Which Swann App Do I Need

In this guide we will show how to add a Swann DVR or NVR to the SwannView Plus app using the recorder’s UID (unique ID). This UID can be entered manually or by scanning the QR code of your recorder. Once you’ve added the device, you can see the cameras live or playback via your phone SwannView Link app.

Step 1: Download SwannView Plus app apk on this page, save it to easy-to-find location. Step 2: Make sure that third-party applications are allowed on your device. Go to Menu Settings Security and check Unknown Sources to allow your device to install applications from sources other than the Google Play Store. Swann DVR/NVR password reset using SwannView Plus software. To start the password reset procedure you need to connect your Swann DVR/NVR to a router or modem. Grab the Ethernet cable that came with the unit and connect one end to your DVR/NVR. Then connect the other end of the cable to your router or modem. The scheme is shown in the picture below. Add to Wishlist. Swann, a global leader in security for home and small business, has unveiled a fully integrated security app ecosystem, encompassing wired and wireless devices. With Swann Security, everything is controllable via this single app. Swann’s wired security systems, including all of our latest DVR and NVR series, now work.

You need to follow these steps to add the a Swann DVR or NVR to your phone:

Swann Plus App For Windows

  1. Install SwannView Plus in your phone
  2. Change the stream settings on your DVR or NVR
  3. Get the DVR’s network information
  4. Add the DVR or NVR to SwannView Plus app by using the QR code

How to add a Swann DVR or NVR on SwannView Plus app via QR code

Install SwannView Plus in your phone

You need the SwannView Plus app to view your cameras on the phone. To download the app, go to Google’s Play Store or Apple’s App Store and search for SwannView Link. Install it and run it on your phone.

Setup

Which Swann App Do I Need

Change the stream settings on your DVR or NVR

For smooth live streaming, it is highly suggested to use Substream when playing the videos. You will also need to adjust the substream’s bitrate to an appropriate level for the unit not to consume too much bandwidth. The bit rate depends on your internet’s speed for both the phone and the location where your security system is installed. You may need to play a little bit with various bitrate levels until you are satisfied.

  1. Go to Menu > Record.
  2. Proceed to Parameters > Substream.
  3. Pick a channel on Camera.
  4. Set the Video Quality to an appropriate bitrate. The better quality, the higher the bitrate and more slower
  5. on the phone. The lower bitrate, the worse the picture quality but it’s smoother on the phone. Find the right balance for your setup.
  6. Click on Copy to replicate the settings to other channels. A window will pop up. Tick all checkboxes to select all channels. Click on OK.
  7. Click on Apply to save the settings.

Get the DVR’s network information

In this section you’ll learn how to locate the UID of your Swann DVR/NVR (the so called QR code).

    1. Access the Main Menu and go to Configuration > Network > General.
    2. Check if Enable DHCP is checked. By default, it is checked meaning it is on DHCP.
    3. You can write the UID code for you to have your own copy in case you’re away from the unit. This code the unique ID of your recorder.

Add the DVR or NVR to SwannView Plus app by using the QR code

  1. Tap the 3-bar icon located at the top left.
  2. Tap the third icon to go to Devices.
  3. Tap on the ‘+’ icon at the upper right.
  4. Enter the information it needs.
    Alias: name your system, for example: “My Home”.
    Register Mode: UID
    UID: Tap the QR code icon and scan the QR code on top of the unit.
    User Name: admin
    Password: type the password of your DVR or NVR
  5. Tap on the save ­icon at the top right. If you got any error message, try rebooting the DVR or NVR and your router or modem. Close the app and open it again.
  6. Tap on Start Live View to load the cameras.
Disclosure:Some of the links in this post are Amazon affiliate links. This means if you click on the link and purchase any item, we will receive an affiliate commission at no extra cost to you. Thanks for your support!

In this guide we will show how to add a Swann DVR or NVR to the SwannView Plus app using the recorder’s UID (unique ID). This UID can be entered manually or by scanning the QR code of your recorder. Once you’ve added the device, you can see the cameras live or playback via your phone SwannView Link app.

You need to follow these steps to add the a Swann DVR or NVR to your phone:

  1. Install SwannView Plus in your phone
  2. Change the stream settings on your DVR or NVR
  3. Get the DVR’s network information
  4. Add the DVR or NVR to SwannView Plus app by using the QR code

How to add a Swann DVR or NVR on SwannView Plus app via QR code

Install SwannView Plus in your phone

You need the SwannView Plus app to view your cameras on the phone. To download the app, go to Google’s Play Store or Apple’s App Store and search for SwannView Link. Install it and run it on your phone.

Change the stream settings on your DVR or NVR

For smooth live streaming, it is highly suggested to use Substream when playing the videos. You will also need to adjust the substream’s bitrate to an appropriate level for the unit not to consume too much bandwidth. The bit rate depends on your internet’s speed for both the phone and the location where your security system is installed. You may need to play a little bit with various bitrate levels until you are satisfied.

  1. Go to Menu > Record.
  2. Proceed to Parameters > Substream.
  3. Pick a channel on Camera.
  4. Set the Video Quality to an appropriate bitrate. The better quality, the higher the bitrate and more slower
  5. on the phone. The lower bitrate, the worse the picture quality but it’s smoother on the phone. Find the right balance for your setup.
  6. Click on Copy to replicate the settings to other channels. A window will pop up. Tick all checkboxes to select all channels. Click on OK.
  7. Click on Apply to save the settings.

Get the DVR’s network information

In this section you’ll learn how to locate the UID of your Swann DVR/NVR (the so called QR code).

    1. Access the Main Menu and go to Configuration > Network > General.
    2. Check if Enable DHCP is checked. By default, it is checked meaning it is on DHCP.
    3. You can write the UID code for you to have your own copy in case you’re away from the unit. This code the unique ID of your recorder.

Add the DVR or NVR to SwannView Plus app by using the QR code

  1. Tap the 3-bar icon located at the top left.
  2. Tap the third icon to go to Devices.
  3. Tap on the ‘+’ icon at the upper right.
  4. Enter the information it needs.
    Alias: name your system, for example: “My Home”.
    Register Mode: UID
    UID: Tap the QR code icon and scan the QR code on top of the unit.
    User Name: admin
    Password: type the password of your DVR or NVR
  5. Tap on the save ­icon at the top right. If you got any error message, try rebooting the DVR or NVR and your router or modem. Close the app and open it again.
  6. Tap on Start Live View to load the cameras.
Disclosure:Some of the links in this post are Amazon affiliate links. This means if you click on the link and purchase any item, we will receive an affiliate commission at no extra cost to you. Thanks for your support!