- Printers / Fax Machines / DCPs / Multi-functions. P-touch Labeling System / Stampcreators (Spanish) P-touch Labeling System / Stampcreators (English) Home Sewing Machines.
- Then re-install the driver for your printer. Be careful when using this software. It will delete all registry information and files related to any Brother P-touch / QL / TD / RJ / PJ / SC / TP printer drivers you have installed. After running Printer Driver Information Cleanup Tool, re-install the drivers for any affected machines.
- Brother Ql-700 Software For Mac
- Brother Ql 700 Printer Software
- Brother Label Printer Ql 700 Software
- Brother Ql 700 Label Maker Software
Solution 1: Verify label roll compatibility
Both Pitney Bowes and Brother make label rolls which can be used with the Brother printer. However, SendPro can only print on Pitney Bowes rolls. SendPro cannot print onto Brother rolls. The Pitney Bowes rolls that can be used with SendPro Online are available from the Pitney Bowes Online Shop.
Offering versatility, convenience and Microsoft integration, the QL-700 delivers totally hassle-free address label printing. ‘P-Touch Editor Lite’ is pre-loaded to the printer itself so there’s no software installation required for PC or Mac. And it’s fast, producing up to 93 labels a minute at up to 600dpi, with an automatic label. Software, USB Cable, Power Cord, Quick Setup Guide, Documentation, Starter rolls: DK-1201 Die-cut Standard Address Labels (100 labels), plus DK-2205 2.4' Continuous Length Paper Tape (26.2 ft.) Warranty.
Solution 2: Turn off Editor Lite mode
Brother Ql-700 Software For Mac
Editor Lite mode should be off. If there is a green light above the Editor Lite button, press the Editor Lite button to turn it off, then restart the SendPro Online software.
Solution 3: Check the printer connections
- The Brother printer is ready to print when the status light on the front of the printer is solid green.
- If the status light on the front of the printer is not lit, press the power button once to turn it on.
- If the printer does not turn on, try plugging it in to a different electrical outlet.
- If the printer still does not turn on, try using a different power cord (if you have one). Ensure that the power cord is securely connected to both the printer and the outlet.
- Try using a different USB cable to connect the printer to the computer. Ensure that the USB cable is securely connected to both the printer and the computer.
- If the USB cable is connected through a USB hub, try connecting the USB cable directly to the computer without using the USB hub.
- Try connecting the USB cable to a different USB port on the computer.
- Note that roll printers connected to a Mac via USB-C or Thunderbolt are not supported.
Solution 4: Check the label roll installation and path
- Press the power button to turn the printer off.
- Remove the bracket that holds the label roll from the printer.
- Check the area where the label feeds through the printer. Remove any material that is jammed inside the printer. A business card can be fed through the area where the label feeds through the printer to remove any jammed material.
- Place the bracket that holds the roll back inside the printer, ensuring that it is properly seated.
- Feed the end of the roll into the slot until the edge of the roll can be seen at the front of the printer. If the end cannot be fed through to the front of the printer, there may be a label jammed inside the printer.
- Press the power button to turn the printer on.
- Press the Feed button, then press the Cut button.
Brother Ql 700 Printer Software
Brother Label Printer Ql 700 Software
Solution 5: Reinstall the printer
Brother Ql 700 Label Maker Software
See Installing the Brother QL-800 printer for SendPro Online.